Heavyweight slip fit base for use with 2 inch diameter pipe and drape uprights. Size: 24x24.
-
Stage Curtains & Backdrops
add remove
-
Stage Curtains and Backdrops
add remove
- Sale Stage Curtains and Backdrops
- Stage Curtains and Auditorium Drapery
- Specialty Stage Curtains
- School Stage Curtains and Drapery
- Church Curtains
- Backdrops for Stage, Studio and Theater
- Acoustic and Sound Absorbing Curtains
- Theatrical Curtains for Commercial, Architectural, and Themed Environments
- Arena Masking
- Rain Curtains
- Event Drapery
- Rental Drapes and Curtain Rentals
- Stage Skirting
-
Stage Curtains and Backdrops
add remove
-
Shop Fabrics & Hardware
add remove
-
Theatrical Fabrics
add remove
- Sale Stage and Theatrical Fabric
- Nylafleece® Nylon Puppet Fleece
- Velour
- Commando Cloth and Duvetyne
- Muslin
- Sharkstooth Scrim and Leno
- Keying Fabrics / Chroma Key Fabrics
- Canvas, Burlap and Gauze
- Metallic Fabrics
- Satin Fabrics
- Sheer Fabrics
- Textured Fabrics
- Lining Fabrics
- Event Fabrics
- Specialty Fabrics
- Acoustical Fabrics
- Projection Fabrics
- Stretch Fabrics
-
Pipe and Drape
add remove
- Sale Pipe and Drape
- Pipe and Drape Backdrops
- Pipe and Drape Backdrop Extensions
- Pipe and Drape Bases
- Pipe and Drape Uprights
- Pipe and Drape Drape Supports
- Pipe and Drape Panels
- Versatop™ Pipe and Drape 2.0®
- Pipe and Drape Accessories
- Pipe and Drape Storage Solutions
- Pipe and Drape Specialty Kits
- Table Skirting Accessories
- Pipe and Drape FAQ
- Pipe and Drape Tips
-
Theatrical Fabrics
add remove
- Rigging add remove
- Resources add remove
- Get a Quote
2" Adjustable Pipe and Drape Upright (12'-20')
Reference: T21220
12-20 foot adjustable 2 inch diameter upright for use with pipe and drape.
- Single upright with an adjustable height of 12'-20' depending on your application
- Slip fit system allows for easy setup and take down
- 2" diameter aluminum pipe provides greater stability
- Upright has 4 slots positioned at 90º angles
- Button stops or locking clamps keep your upright locked at the desired height.
- Button stops adjust at 1’ increments while locking clamps allow you to lock in heights between 1’ increments.
- Upright requires a base (sold separately)
- Recommended minimum base size / weight is 24" x 24"
- For uprights 14' and higher, we recommend using a rubber base weight.
Note: This is an oversized item and must be shipped via freight. Additional shipping charges apply.
You might also like
20 pound rubber base weight for pipe and drape displays. Size: 18x18.
in the same category
6-10 foot adjustable 2 inch diameter upright for use with pipe and drape.
8 foot tall 1.5 inch diameter upright for use with pipe and drape. Breaks apart into two pieces for easy transport.
4-7 foot adjustable 1.5 inch diameter upright for use with pipe and drape.
10 foot tall break apart 1.5 inch diameter upright for pipe and drape displays. Breaks apart for easy transport.
Replacement chrome cap for 1.5 inch diameter pipe and drape uprights.
6 foot tall 1.5 inch diameter upright for use with pipe and drape.
8-14 foot adjustable 1.5 inch diameter upright for use with pipe and drape.
6-10 foot adjustable 1.5 inch diameter upright for use with pipe and drape.
10 foot tall 1.5 inch diameter upright for use with pipe and drape.
8 foot tall 1.5 inch diameter upright for use with pipe and drape.
10-18 foot adjustable 2 inch diameter upright for use with pipe and drape.
7-12 foot adjustable 2 inch diameter upright for use with pipe and drape.
3-5 foot adjustable 1.5 inch diameter upright for use with pipe and drape.
8-14 foot adjustable 2 inch diameter upright for use with pipe and drape.
9-16 foot adjustable 2 inch diameter upright for use with pipe and drape.
3 foot tall 1.5 inch diameter upright for use with pipe and drape.