Light Source Swivel Mega-Coupler allows you to connect two pipes together at any angle.
-
Stage Curtains & Backdrops
add remove
-
Stage Curtains and Backdrops
add remove
- Sale Stage Curtains and Backdrops
- Stage Curtains and Auditorium Drapery
- Specialty Stage Curtains
- School Stage Curtains and Drapery
- Church Curtains
- Backdrops for Stage, Studio and Theater
- Acoustic and Sound Absorbing Curtains
- Theatrical Curtains for Commercial, Architectural, and Themed Environments
- Arena Masking
- Rain Curtains
- Event Drapery
- Rental Drapes and Curtain Rentals
- Stage Skirting
-
Stage Curtains and Backdrops
add remove
-
Shop Fabrics & Hardware
add remove
-
Theatrical Fabrics
add remove
- Sale Stage and Theatrical Fabric
- Nylafleece® Nylon Puppet Fleece
- Velour
- Commando Cloth and Duvetyne
- Muslin
- Sharkstooth Scrim and Leno
- Keying Fabrics / Chroma Key Fabrics
- Canvas, Burlap and Gauze
- Metallic Fabrics
- Satin Fabrics
- Sheer Fabrics
- Textured Fabrics
- Lining Fabrics
- Event Fabrics
- Specialty Fabrics
- Acoustical Fabrics
- Projection Fabrics
- Stretch Fabrics
-
Pipe and Drape
add remove
- Sale Pipe and Drape
- Pipe and Drape Backdrops
- Pipe and Drape Backdrop Extensions
- Pipe and Drape Bases
- Pipe and Drape Uprights
- Pipe and Drape Drape Supports
- Pipe and Drape Panels
- Versatop™ Pipe and Drape 2.0®
- Pipe and Drape Accessories
- Pipe and Drape Storage Solutions
- Pipe and Drape Specialty Kits
- Table Skirting Accessories
- Pipe and Drape FAQ
- Pipe and Drape Tips
-
Theatrical Fabrics
add remove
- Rigging add remove
- Resources add remove
- Get a Quote
Light Source Mega-Coupler
Reference:
Light Source Mega-Coupler has a 1/2 inch × 1 1/4 inch Hex Head Bolt with wing nut and solid nut tabs that won’t break off. The bolt head locks into the hex-milled pocket so that you can tighten the nyloc nut while the clamp is installed.
Light Source™Mega-Coupler has a 1/2″ × 1 1/4" Hex Head Bolt with wing nut and solid nut tabs that won’t break off. It uses standard 1/2 inch by 1-1/4 inch long hex head grade 8 bolts to secure loads up to 1100 lbs. The bolt head locks into the hex-milled pocket so that you can tighten the nyloc nut while the clamp is installed. Mega-Coupler fastens from (1-1/4" Pipe) 1.66" OD to 2 " OD truss tube and has an industry compatible 14 mm thick base.
Technical Specifications:
- Minimum size:1.25" pipe, 1.66" OD pipe
- Maximum size: 1.5" pipe, 1.90" OD pipe, 2" OD truss tube
- Working load limit (WLL):1100 lb (500kg)
- Available in black anodized or silver
*WLL is maximum load that can be applied to the beam clamp which is in "like new" condition and has been properly installed, maintained, and operated.
in the same category
H&H Products 680 Batten Clamp is formed of 10 gauge steel for snug attachment to 1-1/2 inch schedule 40 pipe battens.
Light Source™ Mega-Batten Clamp uses the same hardware and wrench as the rest of the grid system (1 inch x 5/16 inch socket head cap bolt 5/16 inch zinc plated nylon hexbolt). 1/2 inch hole in top for shackles.
Light Source™ Mega-Quick Pipe Splice quickly joins two pipes in line together without drilling or threading for permanent or temporary installations.
Light Source™ Mega-Quick Pipe Splice quickly joins two pipes in line together without drilling or threading for permanent or temporary installations.
Cross Grid Connector allows pipe to be added or removed in place without sliding them from the ends.
Light Source™ Threaded Rod Hanger for the Mega-Batten Clamp allows for connection to a Mega-Batten Clamp.
IWEISS Steel Pipe Clamp P305 is comprised of a pair of formed steel plates bolted together to fully encapsulate a pipe. It is for use supporting schedule 40 1 1/2” pipe in both static and dynamic applications.
Light Source 90-Degree Mega-Coupler allows you to connecxt two pipes together at a fixed 90-degree angle.
Light Source™ Mega-Gridlock Clamp is designed for permanent pipe grid installations in studios and theaters. Joins 2 overlapping pipes together in a 90 degree joint. Grooves act as a wrench holding the nut from turning while installing. Installs with a hex key tool in a battery drill.