H&H Model 680 Batten Clamp

Light Source™ Mega-Quick Pipe Splice quickly joins two pipes in line together without drilling or threading for permanent or temporary installations.

Light Source Mega-Coupler has a 1/2 inch × 1 1/4 inch Hex Head Bolt with wing nut and solid nut tabs that won’t break off. The bolt head locks into the hex-milled pocket so that you can tighten the nyloc nut while the clamp is installed. 

Light Source™ Threaded Rod Hanger for the Mega-Batten Clamp allows for connection to a Mega-Batten Clamp.

Light Source™ Mega-Gridlock Clamp is designed for permanent pipe grid installations in studios and theaters. Joins 2 overlapping pipes together in a 90 degree joint. Grooves act as a wrench holding the nut from turning while installing. Installs with a hex key tool in a battery drill.

Light Source™ Mega-Batten Clamp uses the same hardware and wrench as the rest of the grid system (1 inch x 5/16 inch socket head cap bolt 5/16 inch zinc plated nylon hexbolt). 1/2 inch hole in top for shackles.

Cross Grid Connector allows pipe to be added or removed in place without sliding them from the ends.

IWEISS Steel Pipe Clamp P305 is comprised of a pair of formed steel plates bolted together to fully encapsulate a pipe. It is for use supporting schedule 40 1 1/2” pipe in both static and dynamic applications.

Light Source 90-Degree Mega-Coupler allows you to connecxt two pipes together at a fixed 90-degree angle. 

Light Source™ Mega-Quick Pipe Splice quickly joins two pipes in line together without drilling or threading for permanent or temporary installations. 

Light Source Swivel Mega-Coupler allows you to connect two pipes together at any angle.