Availability: 999 In Stock
The IWEISS Wall Flange P310 is comprised of a U-Bolt mounted to angle iron. It is used for lateral stabilization for pipe grids. Mounting hardware for attachment to structure is not included.
Light Source Mega-Quick Pipe Splice (1.5" Pipe)
Reference:
$15.15
Ships in 5-7 days (See product description for additional notes. We sometimes experience delays with some fabrics/colors.)
Light Source™ Mega-Quick Pipe Splice quickly joins two pipes in line together without drilling or threading for permanent or temporary installations.
Light Source™ Mega-Quick Pipe Splice quickly joins two pipes in line together without drilling or threading for permanent or temporary installations. The Mega-Quick Pipe Splice is the same outside diameter as the pipe for a nice flush look and feel. Installation is simple: Loosen the set screw one half turn with a quarter inch hex key to open the splice. Align the set screw so that it will be on the side of the pipe joint (This will give the maximum strength to the joint). Pinch the bars together at one end, and insert the splice into the first pipe. Next, pinch the other ends of splice together and insert the splice into the second pipe. Slide the pipes tightly toward the splice and tighten the set screw securely with the one quarter inch hex key. Bolts should be tightened to about 30 foot pounds.
For 1 1/2" schedule 40 or schedule 80 pipe.
Technical Specifications:
- Dimensions:8.25" in total length. Piece in middle is 1" wide
- Working load limit (WLL):600 lbs(272.2 kg) horizontal (not rated for vertical use)
- Available in black anodized
*WLL is maximum load that can be applied to the beam clamp which is in "like new" condition and has been properly installed, maintained, and operated.
MQSB
99999 Items
Light Source™ Mega-Quick Pipe Splice quickly joins two pipes in line together without drilling or threading for permanent or temporary installations.
in the same category
12 other products in the same category:
Availability: 999999 In Stock
Light Source Purlin Clamp (3/8 inch Fasteners) is perfect for installing almost anything to bar joists, purlins and I-beams up to 1 inch thick.
Availability: 999999 In Stock
Light Source Purlin Clamp (1/2 inch Fasteners) is perfect for installing almost anything to bar joists, purlins and I-beams up to 1 inch thick.
Availability: 999999 In Stock
Light Source™ Mega-Track Hanger makes hanging 140 or 300 series track from pipe grids or from individual pipes easy.
Availability: 999984 In Stock
Light Source™ Mega-Gridlock Clamp is designed for permanent pipe grid installations in studios and theaters. Joins 2 overlapping pipes together in a 90 degree joint. Grooves act as a wrench holding the nut from turning while installing. Installs with a hex key tool in a battery drill.
Availability: 999993 In Stock
Light Source™ Threaded Rod Hanger for the Mega-Batten Clamp allows for connection to a Mega-Batten Clamp.
Availability: 99999 In Stock
Light Source™ Mega-Quick Pipe Splice quickly joins two pipes in line together without drilling or threading for permanent or temporary installations.
Availability: 999995 In Stock
Cross Grid Connector allows pipe to be added or removed in place without sliding them from the ends.
Availability: 999 In Stock
Light Source Wall Mount (WM1.5PB) quickly secures 1.5" (1.9" O.D.) pipes to the wall for permanent or temporary installations.
Availability: 999999 In Stock
Light Source™ Mega-Track Hanger makes hanging 140 or 300 series track from pipe grids or from individual pipes easy.
Availability: 999991 In Stock
Light Source™ Mega-Batten Clamp uses the same hardware and wrench as the rest of the grid system (1 inch x 5/16 inch socket head cap bolt 5/16 inch zinc plated nylon hexbolt). 1/2 inch hole in top for shackles.
Availability: 999 In Stock
The IWEISS Wall Stabilizer P311 is 1-9/16” DOM tube black finish steel welded to 1/4” plate steel that is meant for insertion into Schedule 40 1-1/2” pipe. It is used as lateral stabilization for pipe grids. Mounting hardware for attachment to structure is not included. Stabilizer can be drilled for a bolted connection, or provided as shown as a solid tub