IWEISS Overlap Clamp (IWLC05) is a formed steel piece for joining and evenly spacing two sections of track. Clamps are sold individually, and should be placed 2’-0” apart at center overlap.
IWEISS Overlap Clamp (IWLC05) is a formed steel piece for joining and evenly spacing two sections of track. Clamps are sold individually, and should be placed 2’-0” apart at center overlap.
Technical Specifications:
IWEISS Overlap Clamp (IWLC05) is a formed steel piece for joining and evenly spacing two sections of track. Clamps are sold individually, and should be placed 2’-0” apart at center overlap.
IWEISS Lite Channel Track Hanging Splice is a pair of formed zinced steel enclosures. This functions both as a splice to join two tracks together creating a longer track and as a method of hanging track at splice point. With assembly comes hardware for clamping and attachment to track.
IWEISS Lite Channel Track Master Carrier (IWLC19) utilizes 4 shielded ball bearing nylon wheels. This carrier is intended for use in a straight track 3/8” rope for bi-part or one way draw, and is also appropriate for walk/draw operation. Clamps are provided for attachment of rope to carrier.
IWEISS Lite Duty Channel Curtain Track (IWLC20B) is used in straight track systems and is appropriate for both walk-along and rope operated curtains.
IWEISS Lite Channel Track Single Carrier (IWLC18) utilizes two nylon wheels and shielded ball bearings. This carrier is intended for use in a straight track with 3/8” rope for bi-part or one way draw, and is also appropriate for walk/draw operation.
IWEISS Single End Pulley (IWLC04), also known as a “Dead End” pulley, contains one 3” diameter nylon sheave with shielded ball bearings mounted in a zinced steel housing that clamps to the interior of our channel track. There is a chain bracket for offstage tie-off of the curtain edge. This pulley is intended for use in a straight track with 3/8”rope for bi-part or one way draw.
IWEISS Double End Pulley (IWLC03), also known as a “Live End” pulley, contains two 3” diameter nylon sheaves with shielded ball bearings mounted in a zinced steel housing that clamps to channel track. There is a chain bracket for offstage tie-off of the curtain edge. This pulley is intended for use in a straight track with 3/8” rope for bi-part or one way draw.
IWEISS Lite Channel Track Clamp Hanger (IWLC06) is a pair of formed steel plates that bolt together above the top of the track. There is a hole provided above the bolted connection for independent suspension of track. Hanger can be mounted anywhere along the track’s length without impeding travel and is spaced based on the system’s weight requirements.
