ADC 1460 Idler Bracket is for use with ADC Rig-I-Flex® 140 Series Track.
-
Stage Curtains & Backdrops
add remove
-
Stage Curtains and Backdrops
add remove
- Sale Stage Curtains and Backdrops
- Stage Curtains and Auditorium Drapery
- Specialty Stage Curtains
- School Stage Curtains and Drapery
- Church Curtains
- Backdrops for Stage, Studio and Theater
- Acoustic and Sound Absorbing Curtains
- Theatrical Curtains for Commercial, Architectural, and Themed Environments
- Arena Masking
- Rain Curtains
- Event Drapery
- Rental Drapes and Curtain Rentals
- Stage Skirting
-
Stage Curtains and Backdrops
add remove
-
Shop Fabrics & Hardware
add remove
-
Theatrical Fabrics
add remove
- Sale Stage and Theatrical Fabric
- Nylafleece® Nylon Puppet Fleece
- Velour
- Commando Cloth and Duvetyne
- Muslin
- Sharkstooth Scrim and Leno
- Keying Fabrics / Chroma Key Fabrics
- Canvas, Burlap and Gauze
- Metallic Fabrics
- Satin Fabrics
- Sheer Fabrics
- Textured Fabrics
- Lining Fabrics
- Event Fabrics
- Specialty Fabrics
- Acoustical Fabrics
- Projection Fabrics
- Stretch Fabrics
-
Pipe and Drape
add remove
- Sale Pipe and Drape
- Pipe and Drape Backdrops
- Pipe and Drape Backdrop Extensions
- Pipe and Drape Bases
- Pipe and Drape Uprights
- Pipe and Drape Drape Supports
- Pipe and Drape Panels
- Versatop™ Pipe and Drape 2.0®
- Pipe and Drape Accessories
- Pipe and Drape Storage Solutions
- Pipe and Drape Specialty Kits
- Table Skirting Accessories
- Pipe and Drape FAQ
- Pipe and Drape Tips
-
Theatrical Fabrics
add remove
- Rigging add remove
- Resources add remove
- Get a Quote
ADC 1408A Threaded Rod Adapter
Reference: 1408A
ADC 1408A Threaded Rod Adapter is for use with ADC Rig-I-Flex® 140 Series Track.
Technical Specifications:
- For use with ADC Rig-I-Flex® 140 Series Track
- This adapter is used with a Model 4208 hanging clamp (not included) to provide a 3/8" hole parallel with the ceiling so that tensile rated threaded rod can be used to support the track system.
- Can also be used with Models 2808, 1708, 4208 clamps as well.
- Recommended spacing: 4'
- Width: Approximately 1-1/4" x 1-3/4" x 2-3/8"
- Weight: 1 - 4 oz.
![ADC 1408A Threaded Rod Adapter](https://gastage.com/1598-large_default/adc-1408a-threaded-rod-adapter.jpg)
ADC 1408A Threaded Rod Adapter is for use with ADC Rig-I-Flex® 140 Series Track.
in the same category
ADC 1402L Overlapping Master Carrier Left is for use with ADC Rig-I-Flex® 140 Series Track.
ADC 4208 Hanging Clamp is for use with ADC Rig-I-Flex® 140 Series Track.
No. 8 1/4 inch sash cord or operating line, black, 600 foot spool. Commonly used in stage and studio track that is operated by hand.
ADC 1402 Master Carrier is for use with ADC Rig-I-Flex 140 Series Track.
ADC BT2 Bending Tool is used to curve 1300 and 1400 I-beam track channels.
ADC 1459 Spindle B is for use with ADC Rig-I-Flex® 140 Series Track.
ADC 1404 Dead End Pulley for use with ADC Rig-I-Flex® 140 Series Track bi-parting systems only.
ADC 1423 Ceiling Clamp is for use with ADC Rig-I-Flex® 140 Series Track.
ADC 1458 Spindle A is for use with ADC Rig-I-Flex® 140 Series Track.
ADC 1403 Live End Pulley is for use with ADC Rig-I-Flex 140 Series Track.
ADC Rig-I-Flex® 140 Series Complete Curtain Track System CWANA (Comes with all necessary accessories*) is a versatile I-beam track which has been engineered for both curved ADC 140 and straight model 141 cord operated systems as well as for "walk-along" Model 142 systems.
ADC Rotodraper® 14A pivot device is used for changing the position of curtains on tormentors, side legs, backdrops and cycloramas.
ADC 1481A Twist Strap is for use with ADC Rig-I-Flex® 140 Series Track.
ADC 1409 End Stop is for use with ADC Rig-I-Flex® 140 Series Track.
ADC Rotodraper® 14 pivot device is used for changing the position of curtains on tormentors, side legs, backdrops and cycloramas.