ADC Rotodraper® 14 pivot device is used for changing the position of curtains on tormentors, side legs, backdrops and cycloramas.
-
Stage Curtains & Backdrops
add remove
-
Stage Curtains and Backdrops
add remove
- Stage Curtains and Auditorium Drapery
- School Stage Curtains and Drapery
- Backdrops for Stage, Studio and Theater
- Paintable Stage Backdrops
- Church Curtains
- Specialty Stage Curtains
- Acoustic and Sound Absorbing Curtains
- Theatrical Curtains for Commercial, Architectural, and Themed Environments
- Arena Masking
- Rain Curtains
- Event Drapery
- Rental Drapes and Curtain Rentals
- Stage Skirting
- Sale Stage Curtains and Backdrops
-
Stage Curtains and Backdrops
add remove
-
Shop Fabrics & Hardware
add remove
-
Theatrical Fabrics
add remove
- Duvetyne and Commando Cloth
- Muslin
- Sharkstooth Scrim and Leno
- Velour
- Keying Fabrics / Chroma Key Fabrics
- Canvas, Burlap and Gauze
- Metallic Fabrics
- Satin Fabrics
- Sheer Fabrics
- Textured Fabrics
- Lining Fabrics
- Event Fabrics
- Specialty Fabrics
- Acoustical Fabrics
- Projection Fabrics
- Stretch Fabrics
- Nylafleece® Nylon Puppet Fleece
- Sale Stage and Theatrical Fabric
-
Pipe and Drape
add remove
- Pipe and Drape Backdrops
- Pipe and Drape Backdrop Extensions
- Pipe and Drape Bases
- Pipe and Drape Uprights
- Pipe and Drape Supports and Crossbars
- Pipe and Drape Panels
- Versatop™ Pipe and Drape 2.0®
- Pipe and Drape Accessories
- Pipe and Drape Storage Solutions
- Pipe and Drape Specialty Kits
- Table Skirting Accessories
- Sale Pipe and Drape
- Pipe and Drape Resources
-
Theatrical Fabrics
add remove
- Rigging add remove
- Resources add remove
- Get a Quote
ADC 1407 Lap Clamp
ADC 1407 Lap Clamp for use with ADC Rig-I-Flex® 140 Series Track.
Technical Specifications:
- For use with ADC Rig-I-Flex® 140 Series Track
- Lap clamps provide and maintain proper track separation at the center overlap of bi-parting track systems so that the master carriers can operate properly in the overlap.
- Lap clamp is constructed of plated or powder coated formed steel and are provided with all assembly hardware.
- Model 1407 clamps are used only with suspended track systems where the tracks are NOT curved through the overlap. If there are curves, model 1407-A must be used.
- Width: Approximately 4" wide x 1-1/2" long x 3/8" deep.
- Weight: 1 - 7 oz.
- Priced individually. 2 required.
ADC 1407 Lap Clamp for use with ADC Rig-I-Flex® 140 Series Track.
in the same category
ADC 1482UNI Universal Wall Bracket is for use with all models of ADC stage curtain track systems.
Durastron Rope, black, 1/4 inch diameter, 1400 foot spool. Made specifically for theatrical applications. Durastron's double braid spun black polyester cover provides a better grip and feels soft in the hand.
ADC 1460 Idler Bracket is for use with ADC Rig-I-Flex® 140 Series Track.
ADC 1409 End Stop is for use with ADC Rig-I-Flex® 140 Series Track.
ADC BT1 Bending Tool is used to curve ADC I-beam track channels for 1300, 1400, and 4200 series tracks.
ADC 1478 Suspension Strap is for use with ADC Rig-I-Flex® 140 Series Track.
ADC 1404 Dead End Pulley for use with ADC Rig-I-Flex® 140 Series Track bi-parting systems only.
ADC 1438 Master Carrier is for use with ADC Rig-I-Flex® 140 Series Track.
ADC 4201 Single Carrier is for use with ADC Rig-I-Flex® 140 Series Track.
ADC 4208 Hanging Clamp is for use with ADC Rig-I-Flex® 140 Series Track.
ADC 1383UNI Universal Wall Bracket is for use with ADC 132 and 220 track systems.
ADC 1408A Threaded Rod Adapter is for use with ADC Rig-I-Flex® 140 Series Track.
Durastron Rope, black, 3/8 inch diameter, 900 foot spool. Made specifically for theatrical applications. Durastron's double braid spun black polyester cover provides a better grip and feels soft in the hand.
Sash cord 1/4 inch (no. 8), black, 100 feet. Commonly used in stage and studio track that is operated by hand. Also known as operating line.
ADC Rotodraper® 14A pivot device is used for changing the position of curtains on tormentors, side legs, backdrops and cycloramas.